شادى ممدوح
08-07-2009, 05:08 PM
سيجييت سوليوشن
http://www.szmaiduo.com/en/images/m02.gif
http://www.szmaiduo.com/en/uploadpic/200948128438856.jpg
http://www.szmaiduo.com/en/uploadpic/200948128438856.jpg (http://www.szmaiduo.com/en/uploadpic/200948128438856.jpg)
Salvation Seagate
General Introduction
The HD Doctor for seagate is a newly released most advanced hardware-software combined solution for data recovery needs towards Seagate HDD, with dozens of powerful functions of practicability added specially for data recovery. It is also the updated version of HDD Repairer (Seagate) PRO. The most breakthrough is, unlike the original Seagate program runs on DOS, with the HD Doctor console, this new Seagate solution can be easily installed on any desktop/laptop/server computer via USB (USB protocol 1.1 or above) socket and runs on Microsoft Windows 98/2000/XP. With full english program interface and supports, this program is easy to use although there are many powerful functions, and ought to be a tool must-have for data recovery and HDD refurbishing companies. Besides the power functions online software update, F > Repair for all series, read/write for all modules, save your time and easy to operate with high success rate.
Brief Introduction on Key Functions
Note: Newly added functions on this version are marked with “*”.
1. Backup modules and tracks: necessary functions for data recovery and drive repair
2. Firmware check, FW Repair, Read-Only Repair: main functions for data recovery of Seagate HDDs
3. Clear G/P/T list, High-speed scan and Sector Repair by adding bad sectors to P-list, Full Drive Zerofill: works well for full drive bad sectors caused by firmware problems and also for logical bad sectors
4. SELFSCAN: factory level sector repair for mass defects, HDD unidentifiable, firmware error, drive slow to be identified
5. Head Depop: head cut for head problems or sequential bad sectors
6. HDD Parameters Setup: DIY the HDD parameters, including the Model number, Serial number and the LBA
7. Clear HDD Password: data recovery towards password protect drives
8. Reset HDD SMART: reset HDD SMART, initialize the drive, works good for data recovery
9. Motor Operations: manually control of the drive motor, works well for PCB HOT SWAP in data recovery or drive repair
10. * Windows version, USB support, fast and easy to operate: you’re now able to run HD Doctor series programs on one computer at the same time
11. * More powerful support: more powerful support towards Seagate series drives, as the following:
U5...12289;U6...12289;U7...12289;U8...12289;U9...12289;U10...12289;UX...12289;K1...12289;K2...12289;K3...12289;K4...12289;K5
K7—APLINE...12289;PUMA...12289;PUMA2...12289;APLUS
K8—TONKA
K9—TONKA2...12289;TONKA15...12289;TONKA40...12289;TLITE1HD
K10—NHAWK1HD...12289;GALAXY...12289;GALAXY2D
Laptop—SATURN...12289;NEPTUNE...12289;MERCURY...12289;MERC2...12289;VENUS
12. * Open-design Resource Update: by collecting needed source information from that HDD using HD Doctor for Seagate and providing to us online, our tech tam can upgrade the support list and send you back a new program supports your model online, making things easier and faster
13. * Read/write for ALL Module
14. * ROM Read/write with PCB
15. * One Key Repair for “GC2” and “P” Error: just one click to fix the “GC 2” problem of F>Repair and “P” problem of SELFSCAN
16. * F>Repair for ALL Seagate HDDs
17. * Head Depop for 7200.8, 7200.9 and 7200.7 SATA
18. * Voltage/Current Protect System: with this function, we could view the real-time voltage and electric current displayed in graph. In this way, we could see whether the power is stable. If the power were unstable, the graph would be very different from normal. Then you could check if there’re some problems about the power supply or the connection. It also enables a drive-protect, in case there’re short circuit being found, the program will cut off the power automatically to avoid any damage to your drive
19. * View Sector: we could see the data of any sector after we have manually set the two parameters (Start Sector and Offset) on the right columns
20. * More Friendly CMD Mode: easier to monitor and see, you can save the information of the drive as txt file for analyzing
21. * Auto/Manual Baud-rate Set: this function enables you to set the baud-rate of the communication between the drive and the HD Doctor USB device
http://www.szmaiduo.com/en/images/m02.gif
http://www.szmaiduo.com/en/uploadpic/200948128438856.jpg
http://www.szmaiduo.com/en/uploadpic/200948128438856.jpg (http://www.szmaiduo.com/en/uploadpic/200948128438856.jpg)
Salvation Seagate
General Introduction
The HD Doctor for seagate is a newly released most advanced hardware-software combined solution for data recovery needs towards Seagate HDD, with dozens of powerful functions of practicability added specially for data recovery. It is also the updated version of HDD Repairer (Seagate) PRO. The most breakthrough is, unlike the original Seagate program runs on DOS, with the HD Doctor console, this new Seagate solution can be easily installed on any desktop/laptop/server computer via USB (USB protocol 1.1 or above) socket and runs on Microsoft Windows 98/2000/XP. With full english program interface and supports, this program is easy to use although there are many powerful functions, and ought to be a tool must-have for data recovery and HDD refurbishing companies. Besides the power functions online software update, F > Repair for all series, read/write for all modules, save your time and easy to operate with high success rate.
Brief Introduction on Key Functions
Note: Newly added functions on this version are marked with “*”.
1. Backup modules and tracks: necessary functions for data recovery and drive repair
2. Firmware check, FW Repair, Read-Only Repair: main functions for data recovery of Seagate HDDs
3. Clear G/P/T list, High-speed scan and Sector Repair by adding bad sectors to P-list, Full Drive Zerofill: works well for full drive bad sectors caused by firmware problems and also for logical bad sectors
4. SELFSCAN: factory level sector repair for mass defects, HDD unidentifiable, firmware error, drive slow to be identified
5. Head Depop: head cut for head problems or sequential bad sectors
6. HDD Parameters Setup: DIY the HDD parameters, including the Model number, Serial number and the LBA
7. Clear HDD Password: data recovery towards password protect drives
8. Reset HDD SMART: reset HDD SMART, initialize the drive, works good for data recovery
9. Motor Operations: manually control of the drive motor, works well for PCB HOT SWAP in data recovery or drive repair
10. * Windows version, USB support, fast and easy to operate: you’re now able to run HD Doctor series programs on one computer at the same time
11. * More powerful support: more powerful support towards Seagate series drives, as the following:
U5...12289;U6...12289;U7...12289;U8...12289;U9...12289;U10...12289;UX...12289;K1...12289;K2...12289;K3...12289;K4...12289;K5
K7—APLINE...12289;PUMA...12289;PUMA2...12289;APLUS
K8—TONKA
K9—TONKA2...12289;TONKA15...12289;TONKA40...12289;TLITE1HD
K10—NHAWK1HD...12289;GALAXY...12289;GALAXY2D
Laptop—SATURN...12289;NEPTUNE...12289;MERCURY...12289;MERC2...12289;VENUS
12. * Open-design Resource Update: by collecting needed source information from that HDD using HD Doctor for Seagate and providing to us online, our tech tam can upgrade the support list and send you back a new program supports your model online, making things easier and faster
13. * Read/write for ALL Module
14. * ROM Read/write with PCB
15. * One Key Repair for “GC2” and “P” Error: just one click to fix the “GC 2” problem of F>Repair and “P” problem of SELFSCAN
16. * F>Repair for ALL Seagate HDDs
17. * Head Depop for 7200.8, 7200.9 and 7200.7 SATA
18. * Voltage/Current Protect System: with this function, we could view the real-time voltage and electric current displayed in graph. In this way, we could see whether the power is stable. If the power were unstable, the graph would be very different from normal. Then you could check if there’re some problems about the power supply or the connection. It also enables a drive-protect, in case there’re short circuit being found, the program will cut off the power automatically to avoid any damage to your drive
19. * View Sector: we could see the data of any sector after we have manually set the two parameters (Start Sector and Offset) on the right columns
20. * More Friendly CMD Mode: easier to monitor and see, you can save the information of the drive as txt file for analyzing
21. * Auto/Manual Baud-rate Set: this function enables you to set the baud-rate of the communication between the drive and the HD Doctor USB device