تامر سوفت
17-08-2010, 04:35 AM
بسم الله الرحمن الرحيم
البورده دة مطلعة عينى بجد انا غيرت فيها كل حاجة البروسيسور والرامات والفانة والحجر وعملت قفلة على الحجر وشحنت البيوس واخر ما زهقت غيرت شريحة البيوس ونفس المشكلة ونفس الرسالة ......chassis.....intruded.........fatel error system halted
وعملت موضوع فى موقع الشركة وردو عليا فعلا وكان الرد كالتالى ......... وعملت الة هما قالو علية بالظبط ونفس العيب فارجو من الاخوة المهنسين حل هذة المشكلة ولكم جزيل الشكر...........ورمضان كريم والله اكرم
My name is Jany and it's my pleasure to help you with your problem.
Please clear CMOS to have a try.
If it is not helpful, please try the follow method:
1, Pull out the chassis jumper cap when the PC is off.
2, Power on the PC and plug the chassis jumper cap into the previous ........(on the adjacent two pins) during the POST procedure.
3, Restart the computer and check if the warning "Chassis intruded" is gone.
http://www13.0zz0.com/2010/08/17/01/383761741.jpg
http://www13.0zz0.com/2010/08/17/01/383761741.jpg
[/imgr]
البورده دة مطلعة عينى بجد انا غيرت فيها كل حاجة البروسيسور والرامات والفانة والحجر وعملت قفلة على الحجر وشحنت البيوس واخر ما زهقت غيرت شريحة البيوس ونفس المشكلة ونفس الرسالة ......chassis.....intruded.........fatel error system halted
وعملت موضوع فى موقع الشركة وردو عليا فعلا وكان الرد كالتالى ......... وعملت الة هما قالو علية بالظبط ونفس العيب فارجو من الاخوة المهنسين حل هذة المشكلة ولكم جزيل الشكر...........ورمضان كريم والله اكرم
My name is Jany and it's my pleasure to help you with your problem.
Please clear CMOS to have a try.
If it is not helpful, please try the follow method:
1, Pull out the chassis jumper cap when the PC is off.
2, Power on the PC and plug the chassis jumper cap into the previous ........(on the adjacent two pins) during the POST procedure.
3, Restart the computer and check if the warning "Chassis intruded" is gone.
http://www13.0zz0.com/2010/08/17/01/383761741.jpg
http://www13.0zz0.com/2010/08/17/01/383761741.jpg
[/imgr]